サブPC 実機にkonalinux無印をk3bで焼いたDVDを入れて出るCUIでのエラー表示
Live
-----------------------------------------------------------------------------------------------
done.
[ok] Starting network connection manager: NetwaorkingManager.
saned disabled; edit /etc/default/saned
[ok] Starting the winbind daemon: winbind.
[....] Enabling laptop mode...SG_IO:
bad/missing sense data, sb: 70 00 05 00
00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SG_IO: bab/missing sense data, sb: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
done (Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/*.conf
is not readable, Skipping.
enabled, not active).
[FAIL] startpar: service(s) returned failure: plymouth ... failed!
-----------------------------------------------------------------------------------------------
Live(failsafe)
----------------------------------------------------------------------------------------------------------
done.
[ok] Starting network connection manager: NetwaorkingManager.
saned disabled; edit /etc/default/saned
[....] Starting the winbind daemon: winbind[ 32.144597] ADDRCONF(NETDEV_UP): eth0: link is not ready
. ok
[....] Enabling laptop mode...SG_IO: bad/missing sense data, sb: 70 00 05 00
00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SG_IO: bab/missing sense data, sb: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 34.427789] NMI watchdog disabled (cup0): not supported (no LAPCI?)
[ 34.427864] watchdog: failed to be enabled on some cups
done (Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/*.conf
is not readable, Skipping.
enabled, not active).
[FAIL] startpar: service(s) returned failure: plymouth ... failed!
[ 35.257800] e1000e 0000:00:19.0: eth0: MAC Wakeup cause - Link Status Change
[ 37.044772] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: R
x/Tx
[ 37.044859] e100e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 37.045176] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
-----------------------------------------------------------------------------------------------
