下記はいつものように結果が失敗の作業なので読む必要は有りません。自分用メモです。
今のジェンツーペンギン 8月 partX 中古PC V-BOXゲスト
ここの主旨はいかにしてtomboyをインストールするかと言う事ですがインストールする事は出来ませんでした。残念。
これは
http://882323836.hatenablog.com/entry/2015/08/14/123447
からの続きで、いかにしてtomboyをインストールするかと言う事です。
USE="を要求されたように書き加えてもNG。
--------------------------------------
# emerge tomboy
前略
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
---
Configuration summary
* Installation prefix = /usr
* C# compiler: /usr/bin/mcs -define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8 -define:GTK_SHARP_2_10 -define:GTK_SHARP_2_12
Optional assemblies included in the build:
* glade-sharp.dll: yes
* gtk-dotnet.dll: yes
* Mono.Cairo.dll: using system assembly
NOTE: if any of the above say 'no' you may install the
corresponding development packages for them, rerun
autogen.sh to include them in the build.
* Documentation build enabled: yes
---
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10 ...
make -j9 CSC=/usr/bin/gmcs
/usr/bin/gmcs /out:gapi-fixup.exe ./gapi-fixup.cs
/usr/bin/gmcs /out:gapi-parser.exe ./gapi-parser.cs
make: /usr/bin/gmcs: Command not found
Makefile:513: recipe for target 'gapi-fixup.exe' failed
make: *** [gapi-fixup.exe] Error 127
make: *** Waiting for unfinished jobs....
make: /usr/bin/gmcs: Command not found
Makefile:516: recipe for target 'gapi-parser.exe' failed
make: *** [gapi-parser.exe] Error 127
emake failed
* ERROR: dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3071: Called gtk-sharp-module_src_compile
* environment, line 2244: Called die
* The specific snippet of code:
* emake CSC=/usr/bin/gmcs || die "emake failed"
*
* If you need support, post the output of `emerge --info '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/environment'.
* Working directory: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10/parser'
* S: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10'
>>> Failed to emerge dev-dotnet/gtk-sharp-gapi-2.12.10, Log file:
>>> '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'
* Messages for package dev-dotnet/gtk-sharp-gapi-2.12.10:
* ERROR: dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3071: Called gtk-sharp-module_src_compile
* environment, line 2244: Called die
* The specific snippet of code:
* emake CSC=/usr/bin/gmcs || die "emake failed"
*
* If you need support, post the output of `emerge --info '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/environment'.
* Working directory: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10/parser'
* S: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10'
Invalid '-' operator in non-incremental variable 'ABI_X86': '-32'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-i915'
後略
--------------------------------------
2015-08-16 追記
今、見ると.exeの文字列が有る。tomboyは元々Linuxのアプリで、それからwin xpの頃
2010年?位にwinに移植でwinでもtomboyが使用出来る様に成ったと思っていますが、
今では、tarを落とすhttpでは無くて、.exeを落とすhttpに行くようにebuildファイルには書いて有るのか?
Arch Linuxではtarを落とすhttpでは無くて、.rpmを落とすhttpに行くようにPKGBUILDファイルには書いて有る物が有るようで、pacman -s なんとか これはyaourt -s なんとか だったかも?の時に画面を見ていたら.rpmの文字列が表示だった事が有る。
2015-08-16 追記終り
http://882323836.hatenablog.com/entry/2015/08/14/123447 で
http://882323836.hatenablog.com/entry/2014/07/21/062523 より
# emerge --ask --changed-use --deep @world なので左記コマンドはNG。
でyes/noを聞いてきたのでyes enter で長々としたemergeが終わって 50分?
9:22- 9:39 17分
# reboot ここでゲスト領域にマウスカーソルを移動で消えてNG。
ここでゲスト領域にマウスカーソルを移動で消えてNG。と言う現象はUbuntuのserver.isoか
mini.isoの時にも有った、実機だとOKだったので、ジェンツーペンギンも実機だとOKなのかも?知れない。
パスワード
# emerge tomboy
悪く成ったゲストは削除して、
Backupをcopyで
ソース15 より
(貼り付け開始)下記の #は// $は# で使用だと思う。
# maskやuseで競合が起こったと仮定
$ emerge --autounmask-write -vDNu world <ーー今ここ
$ dispatch-conf
$ emerge -pvDNu world
# ↑ 設定を自動更新して再度確認
# これでも競合が解消されなければ手作業でmaskやuseを調整
(貼り付け終了)
# reboot
パスワード
$ sudo su
# emerge tomboy
* S: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10'
>>> Failed to emerge dev-dotnet/gtk-sharp-gapi-2.12.10, Log file:
>>> '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'
* Messages for package dev-dotnet/gtk-sharp-gapi-2.12.10:
* ERROR: dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3071: Called gtk-sharp-module_src_compile
* environment, line 2244: Called die
* The specific snippet of code:
* emake CSC=/usr/bin/gmcs || die "emake failed"
*
* If you need support, post the output of `emerge --info '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`,
# emerge --quiet-build --emptytree @world 半日は掛ったと思う。
10:35-17:45 7時間10分 766個 これはCPUが低スペだから。
766個ですか・・・・これは期待が持てない。が終わるのを待っています。
409/766 13:55 665/766 15:43 730/766 16:33
757/766 17:41
今日も一日が過ぎてゆく・・・・
考察として作業順序が昨年の作業順序ではよろしく無いのか?
make.confは2回に分けて作業の方がいいのか?
ここでゲスト領域にマウスカーソルを移動で消えてNG。に成る予感。今までの経験で。
ジェンツーペンギンのインストール失敗回数のギネスブック入りでも目指そうか。
# reboot ここでゲスト領域にマウスカーソルを移動でOK
パスワード
$ sudo su
# emerge tomboy
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
---
Configuration summary
* Installation prefix = /usr
* C# compiler: /usr/bin/mcs -define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8 -define:GTK_SHARP_2_10 -define:GTK_SHARP_2_12
Optional assemblies included in the build:
* glade-sharp.dll: yes
* gtk-dotnet.dll: yes
* Mono.Cairo.dll: using system assembly
NOTE: if any of the above say 'no' you may install the
corresponding development packages for them, rerun
autogen.sh to include them in the build.
* Documentation build enabled: yes
---
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10 ...
make -j9 CSC=/usr/bin/gmcs
/usr/bin/gmcs /out:gapi-fixup.exe ./gapi-fixup.cs
/usr/bin/gmcs /out:gapi-parser.exe ./gapi-parser.cs
make: /usr/bin/gmcs: Command not found
Makefile:513: recipe for target 'gapi-fixup.exe' failed
make: *** [gapi-fixup.exe] Error 127
make: *** Waiting for unfinished jobs....
make: /usr/bin/gmcs: Command not found
Makefile:516: recipe for target 'gapi-parser.exe' failed
make: *** [gapi-parser.exe] Error 127
emake failed
* ERROR: dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3071: Called gtk-sharp-module_src_compile
* environment, line 2244: Called die
* The specific snippet of code:
* emake CSC=/usr/bin/gmcs || die "emake failed"
*
* If you need support, post the output of `emerge --info '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/environment'.
* Working directory: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10/parser'
* S: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10'
>>> Failed to emerge dev-dotnet/gtk-sharp-gapi-2.12.10, Log file:
>>> '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'
* Messages for package dev-dotnet/gtk-sharp-gapi-2.12.10:
* ERROR: dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3071: Called gtk-sharp-module_src_compile
* environment, line 2244: Called die
* The specific snippet of code:
* emake CSC=/usr/bin/gmcs || die "emake failed"
*
* If you need support, post the output of `emerge --info '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/environment'.
* Working directory: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10/parser'
* S: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10'
Invalid '-' operator in non-incremental variable 'ABI_X86': '-32'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-i915'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-i965'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-ilo'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-intel'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-nouveau'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-r100'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-r200'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-r300'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-r600'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-radeon'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-radeonsl'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-vmware'
7時間10分掛けた苦労は報われませんでした。
結論としてtomboyのインストールは諦める。と思ったが
類推で
# emerge -avt xf86-video-virtualbox より
類推で
# emerge -avt dev-dotnet/gtk-sharp-gapi
---
Configuration summary
* Installation prefix = /usr
* C# compiler: /usr/bin/mcs -define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8 -define:GTK_SHARP_2_10 -define:GTK_SHARP_2_12
Optional assemblies included in the build:
* glade-sharp.dll: yes
* gtk-dotnet.dll: yes
* Mono.Cairo.dll: using system assembly
NOTE: if any of the above say 'no' you may install the
corresponding development packages for them, rerun
autogen.sh to include them in the build.
* Documentation build enabled: yes
---
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10 ...
make -j9 CSC=/usr/bin/gmcs
/usr/bin/gmcs /out:gapi-fixup.exe ./gapi-fixup.cs
/usr/bin/gmcs /out:gapi-parser.exe ./gapi-parser.cs
make: /usr/bin/gmcs: Command not found
Makefile:513: recipe for target 'gapi-fixup.exe' failed
make: *** [gapi-fixup.exe] Error 127
make: *** Waiting for unfinished jobs....
make: /usr/bin/gmcs: Command not found
Makefile:516: recipe for target 'gapi-parser.exe' failed
make: *** [gapi-parser.exe] Error 127
emake failed
* ERROR: dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3071: Called gtk-sharp-module_src_compile
* environment, line 2244: Called die
* The specific snippet of code:
* emake CSC=/usr/bin/gmcs || die "emake failed"
*
* If you need support, post the output of `emerge --info '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/environment'.
* Working directory: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10/parser'
* S: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10'
>>> Failed to emerge dev-dotnet/gtk-sharp-gapi-2.12.10, Log file:
>>> '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'
* Messages for package dev-dotnet/gtk-sharp-gapi-2.12.10:
* ERROR: dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo failed (compile phase):
* emake failed
*
* Call stack:
* ebuild.sh, line 93: Called src_compile
* environment, line 3071: Called gtk-sharp-module_src_compile
* environment, line 2244: Called die
* The specific snippet of code:
* emake CSC=/usr/bin/gmcs || die "emake failed"
*
* If you need support, post the output of `emerge --info '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`,
* the complete build log and the output of `emerge -pqv '=dev-dotnet/gtk-sharp-gapi-2.12.10::gentoo'`.
* The complete build log is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/temp/environment'.
* Working directory: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10/parser'
* S: '/var/tmp/portage/dev-dotnet/gtk-sharp-gapi-2.12.10/work/gtk-sharp-2.12.10'
これはダメのようです。が再び
# emerge --ask --changed-use --deep @world なので左記コマンドはNG。
... done!
Nothing to merge; quitting.
ムム・・・打つ手が無いような感じ。
# emerge audacious でOKでaudaciousが機能した。
portholeでstreamtunerをemergeでOKでstreamtunerが機能した。
portholeでtomboyをemergeでNG
portholeでdev-dotnet/gtk-sharp-gapiemergeでNG
vmware-playerではtomboyをインストールする事が出来た。
portholeでgnoteならインストールする事が出来たが相変わらず使い物に成らない出来。
これは少なくとも1年前からその状態なのですが、改善する気が有るのか?
それとも、このアプリのサポートは切れているのか?
Arch Linuxでは今年一時期tomboyがNGでgnoteがOKの時が
有ったような気がするが今はどうなのかは不明。
# emerge exaile で要求されたUSE="とpackage.useを書きこんで再び
# emerge exaile でOKでexaileが機能した。Ver3.2.0 古い。
このVerではラジオがNG。
やる気が有るのなら3.4.xのtarを落としてbuildで作るのですが、
tomboyがNGなので、そこまでする気は無い。
このやり方で実機にOSのGUIがインストール出来たとしても
tomboyはemerge出来ないのではと思う。
はっきり言ってジェンツーペンギンは普通、日常では使用していないので、
どうでもいいではないかと思うが、日常では使用していないのでtomboyは
emerge出来た物が欲しいのです。
ジェンツーペンギンにどれほど私がMint17で使用のアプリをインストールする事が
出来るのか?その為だけでインストールしているので。
ソース 1
VirtualBoxにGentoo/Linuxのインストールしたときのメモ 2014-05-28
http://k-side.hatenablog.jp/entry/2014/05/28/171801
ソース4
GentooをVMWareにインストールしてみた | Aruneko的PCのような何か
http://www.aruneko.net/archives/1189 <--これも意味深
ソース6
Gentoo on VirtualBoxでX環境構築
ソース15
hanepjiv 2014年11月22日土曜日
Gentoo Linux / gentooのアップデート 変更 2015-04-27
http://hanepjiv.blogspot.jp/2014/11/gentoo-linux-3-gentoo.html